RTV Silicon Rubber From Quanxu

October 23, 2023

Model NO.: 635# RTV silicon rubber

Trademark: hongye silicone rubber

Origin: Shenzhen

HS Code: 39100000

Model NO.: 635# RTV silicon rubber

Trademark: hongye silicone rubber

Origin: Shenzhen

HS Code: 39100000

(1) RTV silicon rubber application:
RTV silicon rubber General Use for Plaster, resin, cements mold is good for casting Plasters, Cements and resin, which is air drying.
Makes very economical strong and durable moulds for the casting of Plasters, cements and resin. Can also be used to cast polyurethane as well.

(2) Operating steps of RTV silicon rubber for Plaster, resin, cements mold
1. Deal with the original mould.
2. Spray release agent evenly on the original mould
3. Weigh the silicone rubber and curing agent correctly and mix them evenly
4. Deairring and air bubble eliminating handling
5. Perfusion or brushing process

(3) Features of RTV silicon rubber for Plaster, resin, cements mold:
(1) Free customer service to solve technical issues in earliest time.
(2) Curing agent arrange together as free charged
(3) Very low shrinkage and good dimensional stability
(4) High elasticity, for easy removal fo complex replica parts
(5) Sample orders are available.
(6) Special produce accordingly to your request

(4) Storage and Precautions of RTV silicon rubber for Plaster, resin, cements mold RTV silicone rubber for Plaster, resin, cements mold, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported As non-hazardous goods. The shelf life of the product is about one year from The date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

Any more information of RTV silicon rubber for Plaster, resin, cements mold, please contact us.

Item	viscosity(CS)	Hardness shore A	Tensile-tstrength (kgf/cm2)	Tear-strength(kgf/cm)	elongation: (%)	shrinkage: (%	Curing agent ratio (%)	Pot time (min )
635	13000-15000	35±2	43-46	33-36	380-400%	≤0.3%	according to customers requirements
625	16000-18000	25±2	35-38	21-25	450-500%	≤0.3%	according to customers requirements
630	28000-30000	30±2	42-45	28-35	400-440%	≤0.3%	according to customers requirements

For more information, pls contact with Ivy at any time!
Tel: +86-755 8994 8019
Mobile: +86-18938867558
(1) RTV silicon rubber application:
RTV silicon rubber General Use for Plaster, resin, cements mold is good for casting Plasters, Cements and resin, which is air drying.
Makes very economical strong and durable moulds for the casting of Plasters, cements and resin. Can also be used to cast polyurethane as well.

(2) Operating steps of RTV silicon rubber for Plaster, resin, cements mold
1. Deal with the original mould.
2. Spray release agent evenly on the original mould
3. Weigh the silicone rubber and curing agent correctly and mix them evenly
4. Deairring and air bubble eliminating handling
5. Perfusion or brushing process

(3) Features of RTV silicon rubber for Plaster, resin, cements mold:
(1) Free customer service to solve technical issues in earliest time.
(2) Curing agent arrange together as free charged
(3) Very low shrinkage and good dimensional stability
(4) High elasticity, for easy removal fo complex replica parts
(5) Sample orders are available.
(6) Special produce accordingly to your request

(4) Storage and Precautions of RTV silicon rubber for Plaster, resin, cements mold RTV silicone rubber for Plaster, resin, cements mold, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported As non-hazardous goods. The shelf life of the product is about one year from The date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

Any more information of RTV silicon rubber for Plaster, resin, cements mold, please contact us.

Item	viscosity(CS)	Hardness shore A	Tensile-tstrength (kgf/cm2)	Tear-strength(kgf/cm)	elongation: (%)	shrinkage: (%	Curing agent ratio (%)	Pot time (min )
635	13000-15000	35±2	43-46	33-36	380-400%	≤0.3%	according to customers requirements
625	16000-18000	25±2	35-38	21-25	450-500%	≤0.3%	according to customers requirements
630	28000-30000	30±2	42-45	28-35	400-440%	≤0.3%	according to customers requirements